General Description
DW8560 is an integrated AC input high-voltage LED driver for direct line operation. 220V AC line voltage is rectified by Bridge Rectifier, and supply for LED and DW8560. During one rectified line voltage cycle, 4 HVLED segments are turned on in proper sequence as the line voltage increases and turned off in reverse sequence as the line voltage decreases. DW8560 setup LED current for every LED segment, which ensures high power factor and low THD. LED current can be setup via an external resistor conveniently. The setup range is 10~50mA. DW8560 regulates the effective LED current and ensures the LED current is constant when VIN varies. DW8560 provides over temperature protection. When temperature inside chip exceeds 145℃, DW8560 limits the maximum current which can help chip cooling.

Features
- 50/60Hz, AC input operation
- Only 2 external components
- Integrated 600V and 500V LDNMOSFET
- High power factor and low THD
- Programmable LED current
- Constant LED current control
- Over thermal protection
- eSOP8 package

Pin Information

Application Reference
VIN: 220VAC
IOUT: 20mA

Design Guideline
1. When For improving efficiency, the 4 LED strings should be designed as following:

LED String	Forward voltage
1st LED string	162V
2nd LED string	36V
3rd LED string	36V
4th LED string	18V

2. The LED connection wire on PCB or Aluminum substrate should be as short as possible to avoid noise
disturb by LC coupling